New Hire Walkthrough Remote Location

**ONLY FOLLOW THESE INSTRUCTIONS IF YOU ARE COMPLETING THESE ACTIONS OUTSIDE OF AN ENERCON OFFICE**

 

Windows Autopilot is what ENERCON uses to provision new machines. It is a collection of technologies used to set up and pre-configure new devices, getting them ready for productive use.

If you run into any computer or IT related issues related to the new hire setup please reply back to the email for faster service, or call (678) 354-8344 and select option 3.

 

Estimated Time to Complete Setup: 20-30 minutes (depending on internet speed)

 

Please connect to a stable network during the computer setup (Not a mobile hotspot, hotel Wi-Fi, or café Wi-Fi)


Please make sure to have the Microsoft Authenticator App installed before going forward

 

Setup Steps

  1. Unbox the device, plug it in to power, and turn it on.
  2. Select United States for the region and select "Yes"
    A computer screen with a blue box and white textDescription automatically generated
  3. Select "US" for the keyboard layout and select "Yes"
    A computer screen with a blue screenDescription automatically generated
  4. Select "Skip"
  5. Connect it to a wired or wireless network with internet access and select "Next"
  6. At the Windows login page, double click anywhere on the screen to pull up a login box.
  7. Select "Sign-in options"
    **NOTE: If you do not see "Sign-in options" right away, please perform a reboot and try again.**
    A screenshot of a login screenDescription automatically generated
  8. Select the FortiClient icon (red shield)
    A screenshot of a login screenDescription automatically generated
  9. Login with your ENERCON username (note that this is your email address without the @enercon.com piece) and password and press Enter.
    A screenshot of a login boxDescription automatically generated
  10. You will receive an app notification on your mobile device to approve authentication. Select the notification and then select “Approve” to approve the Login Request for VPN. 
    **NOTE: Only select “Approve” if YOU are attempting to login. If you are NOT trying to login, select "NO, IT'S NOT ME”. If you receive any unexpected notification to approve, please alert ENERCON IT immediately.**

 

**NOTE: If you receive an error message related to domain not being available, restart the machine and try to login again.**

 

  1. Your machine will start performing the final setup and you will see "This might take several minutes." Please do not turn off your PC, it can take up to 10 minutes to finish.
    A blue screen with white textDescription automatically generated
  2. After that has completed, you will be brought to your Desktop screen
    A computer screen shot of a blue screenDescription automatically generated
  3.  On your desktop please click on the “Start Button”, click on “Settings”, 
    A screenshot of a computerDescription automatically generated
  4. Click on “Accounts”
    A screenshot of a computerDescription automatically generated
  5. Click on “Access work or school”
    A screenshot of a computerDescription automatically generated
  6. Click on “Connect”
  7. You will be redirected to the Account Settings for Work or School and a login prompt will appear. Input your ENERCON e-mail address and select "Next"
    A screenshot of a computerDescription automatically generated
  8. Enter your password and select "Sign in"
    A screenshot of a computerDescription automatically generated
  9. You will receive an authentication request to approve your login. Open your Microsoft Authenticator app, and enter the number shown on your machine.
    **NOTE: Do not enter the code in this article**
    **NOTE: Only Approve if YOU are attempting to login. If you are NOT trying to login, select “NO, IT'S NOT ME”. If you receive any unexpected notifications to approve, please alert ENERCON IT immediately.**
    A screenshot of a computerDescription automatically generated
  10. On the "Stay signed in to all your apps" page, ensure that the box is checked and select "OK"
    A screenshot of a computerDescription automatically generated
  11. On the "You're all set!" page, select "Done"
    A screenshot of a computerDescription automatically generated
  12. You will now see your ENERCON account under the "Work or school account section" You can now close out of that window.
  13. At this stage, Autopilot has finished configuring your device for use, but you will see a variety of applications starting to install for the next 30-45 minutes.
  14. Once logged in you can go ahead and press "Ctrl + Alt + Del" and change your password
    A screen shot of a computerDescription automatically generated
  15. You should have office applications available immediately after sign in (Outlook, Teams, Word, etc.). You can launch them from the start menu and sign in.
    **NOTE: Sometimes teams appears stuck on a splash page. You can safely right click Teams and "Quit." Re-launch from the start menu and it should open right up.**
  16. Later, you will receive a prompt to "Set BitLocker startup PIN. Enter your PIN in both boxes and select "Set PIN"
     You can set your PIN to whatever you would like.
    **NOTE: You will be required to enter this PIN each time your machine performs a reboot, so please memorize it.**
    A screenshot of a computerDescription automatically generated

 

While you Wait

While you are waiting for applications and other settings to take place on your machine, you can perform the following:

  1. You can start on your New Hire Training in Cornerstone
    1. Start New Hire Training
  2. If Microsoft Office has not been installed yet, you can access Microsoft Applications through the Web
    1. Outlook Web Link
    2. Microsoft Teams Web Link